Loading ...
Loading ...
Loading ...
[]
Materials Needed
• '/8" Allen wrench
• 5/,6"socket
• Phillips screwdriver
• Putty knife
• Carpenter's level
Select Location
The wine chiller was designed to be installed under the
counter. Its proper location will ensure peak
performance. Choose a location indoors, away from
heat and out of direct sunlight. Best performance will
be maintained when installed within the following
parameters:
Ideal Ambient
Temperature Range
Built-In ........................................................65 - 80° F
(18 - 27° C)
Provisions for electricity should be determined before
placing the wine chiller in its final location (see page 2}.
Cabinet Cutout Dimensions
/
\
A 24" (61.0 cm)*
B Min. 34Y2" (87.6 cm)
Max. 35'/4" (89.5 cm)
C 24Y8" (61.27 cm)
* If door is recessed between cabinets, cabinet cutout
must be 24'/4" (61.6 cm) in width.
Cabinet Clearance
Ventilation is required from the bottom front section of
the wine chiller. Keep this area open and clear of any
obstructions.
The adjacent cabinets and counter top can be built
around the wine chiller as long as no top trim or
counter top is installed lower than the top of the hinge.
Installation should allow for the wine chiller to be
moved if service is ever required.
Loading ...
Loading ...
Loading ...