Loading ...
Loading ...
Loading ...
15
Installation
Stainless Steel Interior Dishwasher
• Install toekick slides to toekick support
brackets. Use slide stamped “L” on left and
“R” on right side.
• Align front and inner toekicks, matching
screw holes.
• Align slides to second screw hole as illus-
trated.
• Install color matched screws “E” through
the front of the toekick and into the toekick
slides. Do not tighten screws.
• Carefully, slide assembly back until it is
aligned with adjacent cabinetry toekick.
• Adjust the height of the panel by loosening
screws and sliding the front panel down,
even with the floor.
• Carefully, hold the door and open fully.
Insure that door does not strike top of
toekick.
• Adjust toekick height if necessary.
• Tighten screws.
Step 11
Install
Toekick
Assembly
Step 12
Install
Side Filler
Strips
• Side filler strips are packed with this dish-
washer. If the cabinet cutout is wider than
the dishwasher, install the filler strips on
both sides of the dishwasher to cover gaps.
• Open the door fully.
• Place side trim against dishwasher tub and
install 2 screws, loosely on each side.
• Adjust trim to correct width. Tighten screws.
Attachment Screws
Slide toekick out
Pull tab while
Pushing toekick in
Screws E
Screws B
Front Toekick Panel
Inner Toekick
Left Side
Toekick
Slide
Side
Trim
Loading ...
Loading ...
Loading ...