Napoleon NEFB27H3A Cinema Series Vent Free Electric Fireplace

User Manual - Page 14

For NEFB27H3A.

PDF File Manual, 52 pages, Read Online | Download pdf file

NEFB27H3A photo
Loading ...
Loading ...
Loading ...
*NEFB27H, NEFB29H REMOTE
CONTROL ILLUSTRATED
EN
W415-1454 / C / 02.23.16
14
4.2 OPERATING BY REMOTE CONTROL
!
WARNING
TO AVOID DANGER OF SUFFOCATION KEEP THE PACKAGING BAG AWAY FROM BABIES AND
CHILDREN. DO NOT USE IN CRIBS, BED, CARRIAGES OR PLAY PENS. THIS BAG IS NOT A TOY.
KNOT BEFORE THROWING AWAY.
A. The power button can be used to turn the appliance on/off. Pressing
this button activates the power to the appliance. Pressing the
power button again will turn off the appliance. The ember and log will
fade after 4 seconds after turning off the appliance.
B. To adjust the ame brightness and ember log light, press the ame
button . There is one ember log light and three ame brightness
levels to cycle through and then an off setting ( LL, F1, F2, F3 and
then F0).F3 is the brightest ame level, LL is the ember log light only.
C. To control the thermostat function press the thermostat button .
There are 7 temperature settings (61°F, 64°F, 70°F, 75°F, 81°F
85°F and off). The default setting will display Fahrenheit. Press the
thermostat button to cycle through the settings. Once you have
selected the desired temperature the heater will automatically
operate until that temperature is reached. When the room
temperature is 2 degrees lower than the temperature setting, the
heater will turn on.
D. To activate the heater and blower, press the heater button , the
blower will turn on. Press the heater button again to set desired low
or high heat temperature; press the heater button again to turn off
the heater.
E. The timer controls all operating modes of the appliance. To activate
the timer, press the timer button , the icon will illuminate and the
time will appear on the LED display. To choose the desired time,
continue to press the timer button, there are 8 settings (30mins,1h,
2h, 3h, 4h, 5h, 6h and off). The replace will turn off at the setting
time.
F. To activate the decoration light, press the light button .There are three settings to cycle through and
then an off setting (d1, d2, d3 and then d0). d1 white colour, d2 colour cycles from White / Orange /
Blue / Orange-Blue / White-Orange / White-Blue. It will take 8.5 seconds to switch from one colour to
the next when in d2 setting, d3 will lock to a desired colour (Only NEFB27H and NEFB29H models
have the decoration light feature).
G. To turn off the appliance, press the power button once on the remote, or press the power button once
on the control panel on the unit.
NOTE: This hand held remote control must remain within 6 meters or 19 feet of the appliance to be
effective.
NOTE: When operating the remote control, it must be directed towards the front center of the appliance.
Loading ...
Loading ...
Loading ...