Loading ...
Loading ...
Loading ...
4.Positionthedovetailportionofoneof
thewheelassembliesintotheacces-
sorycaddyasillustrated.Tapthewheel
supportintotheaccessorycaddywitha
softmallet.Repeatforthesecond
wheelassembly.
5.Turntheaccessorycaddyupright.
Thiscompletestheassemblyofyour16
gallonweVdryvacaccessorycaddy.
Thecaddyisnowreadytoinstallthesix-
teengallondrumofyourCraftsmanwet/
dryvac.
To Install Your Vac Drum Onto
the Caddy
1. Place the caddy (now fully assembled)
inthe upright position (all four wheels
positioned on the floor).
2. Locate the drain on your wet/dry vac
drum. When the drum is positioned into
the vac caddy, the drain must be cen-
tered between the two front dual wheel
casters. There are two mounting posts
in the caddy that must press into the
mounting holes of the drum (see illus-
tration). When properly oriented, the
drum may be pressed down and a
small tab located in the caddy will snap
into the drum below the drain. Adistinct
snap will be heard indicating you have
completed the caddy assembly.
NOTE: Since your wet/dry vac caddy is
designed for permanent attachment to the
drum, it is not necessary to remove the
vac from the accessory caddy when dis-
posing of debris.
Drum
,,Drain
Mounting
Caddy ! II / Post
7
Loading ...
Loading ...
Loading ...