Loading ...
Loading ...
Loading ...
Change the light bulb
The dryer light turns on inside the drum
when you open the door.
To change the light bulb:
Set program selector to "off".
Turn off the circuit breaker.
Pull out power supply plug.
Open the door and locate the light
bulb on the upper left side of the
seal.
Loosen the screw of the cover and
open the cover.
Turn bulb counterclockwise.
Replace the bulb with a new
appliance bulb only (obtainable
through parts department).
Replace the cover and secure with
the screw.
Plug in dryer or reconnect power
supply.
Troubleshooting
TO AVOID RISK OF
ELECTRICAL SHOCK !
TO AVOID EXPLOSION
HAZARD[
Repairs or replacement of parts may
be carried out by authorized
technicians only.
Before calling the customer service,
check whether you can rectify the fault
yourself by means of the following
table.
If a fault cannot be rectified or a repair
is required:
1. Set program selector to "Off".
2. Turn off the circuit breaker.
3. Pull the main plug out of the
socket.
4. Close the shut off valve.
5. Call customer service
(see page 21 ).
Problem
Dryerdoesnotstart.
"StaWStop"indicatorlight doesnot
illuminate.
Laundryis wet after drying.
Programhas beeninterrupted.
A warningsignalis emittedand the
displayshows"E:01 ".
Degreeof dryinghasnot beenreached
or the dryingtime istoo long.
Displaymay indicate"E:03".
Possiblecause
Mainplug not insettedat all or not insertedcorrectly.
A fuseof powersupplyhastripped.
"StaWStop"buttonnot pressed.
Noprogramselected.
Doornot closed.
Ambienttemperaturebelow41 °F/5 °C.
Theshut-off valveis closed.
Lintfilter dirty.
Exhaustair duct is blockedortoo long.
Faultin programsequenceor malfunction.
The room/cabinetis not adequatelyventilated.
Moisturesensordirty.
Exhaustair duct is blockedortoo long.
Lintfilter dirty.
Laundrywas too wet.
Unsuitableprogramselected.
Maximumdryingtime was exceeded.
Motorlimittemperaturewasexceeded.
Remedialaction
Insertmainplugcorrectly.
Replace/switchon fuse.
Press"Start!Stop"button.
Selectprogram.
Closedoor.
Increaseroomtemperature.
Openthe shut-offvalve.
Cleanfilter asdescribedonpage19
Switchoff/switchonagain.
Cleanexhaustairduct. Reduceexhaustair ductto
maximumlengthas describedon page7
Switchoff/switchonagain.
Switchoff dryer,leaveto cooldownfor 30 min,
switchon again.
Restat_program.
Providean adequatesupplyof fresh air.
Switchoff/switchonagain.
Cleanmoisturesensoras describedon page19.
Switchoff/switchonagain.
Cleanexhaustair extraction.Reduceexhaustair duct
to maximumlengthas describedon page7
Switchoff/switchonagain.
Cleanfilter asdescribedonpage19.
Switchoff/switchonagain.
Spinlaundryat higherspeedin the washing
machine.Switchoff/switchon again.
Selectprogramwith aid of the programselection
table(seepage19).Switchoff/switchon again.
Cleanlintfilter (seepage19).
Checkexhaustair extraction.
Spinlaundryat a higherspeedin your washer.
Switchoff dryer,leaveto cooldownfor 30 min.
Switchon again.Startprogram.
2O
Loading ...
Loading ...
Loading ...