Loading ...
Loading ...
Loading ...
SLEEP
CLOCK/TIMER
SET
DAILY Timer indicator
F_I
SLEEP indicator _ T T M ii lil
• . .;:tt:rr _ _ , , LT_:,-'
REC (Reco rd, ng) ::::rr 'it;":'
Ii,q_l
* When the System is in use. the display shows other items as well.
For simplicity, we show here only the items described in this section•
Three types of timers are available:
DALLY Timer
Use this timer to set wake up everyday to music from any
source, instead of an alarm clock.
REC (Recording) Timer
Unattended recording of radio broadcasts. You can set tile
starting time and ending time.
SLEEP Timer
Fall asleep aad have your System turn oft" alltolnatically after
a certain length of time.
Setting the Clock
When you plug the AC power cord into the wall outlet, the time in-
dication "AM 12:00" blinks on the display.
You can set the clock whether the System is on or off.
Using the Unit
t Press the CLOCK/TIMER button.
The hour digit of the time indication blinks on the display.
2 Press the 1_141or l,q_l button to set the hour.
Pressing the _ button moves the time forwards and pressing
the 1<141button moves it backwards. Hokting down the button
moves the hour rapidly.
3 Press the SET button.
Tile minute digits of tile time indication blink on tile display.
• To return to the hour setting, press the CANCEL button.
4 Press the I<1<1or I_1_1button to set the minute.
5 Press the SET button.
"CLOCK OK" appears on the display. Then, the selected time
is set and the seconds start counting from O.
Fixing the Clock
Usingthe Unit
1 Press the _/I STANDBY/ON button to turn
on the System.
2 Press the CLOCK/TIMER button repeatedly
until clock setting display (time indication)
appears on the display.
Each time you press tile button, disphty changes as t_llows:
DAILY "-_ ON TIME "-" REC "-" ON TIME "-" Clock Setting
display (time indicator) "-_ Canceled "-_ (back to the beginning)
3 Press the SET button
The hour digits of the current clock blink on the disphty.
4 Follow steps 2 to 5 of "Setting the Clock" men-
tioned above.
• The clock must be correctly set for the timers to work.
• Each setting step must be completed within approx. 30
seconds. Otherwise, the setting is cleared and must be
repeated from the beginning.
• The clock may gain or lose one to two minutes per month.
• If there is a power failure, the clock loses its setting
immediately. "AM 12:00" blinks on the display and the
clock must be reseL
2O
Loading ...
Loading ...
Loading ...