Loading ...
Loading ...
Loading ...
®®®1@
® ® ®1o
®
6
JVC
RE_TE¢ONT_OL
• PUSH OPEN
(Deck A)
-- TAPE B _-
TAPE A _-
TAPE A _-
TAPE B _-
• PUSH OPEN
(Deck B)
T rl rl r rl
i r-i r- t-_- --I-'1
T
Deck indicators _-: Tape indicator
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
The Cassette Deck allows you to play, record, and dub audio tapes.
F3Listening to type ] tape is suitable t_r this Cassette Deck.
The use of tapes longer than 120minutes (including
120 minute tapes) is not recommended, since char-
acteristic deterioration may occur and these tapes
easily jam in the pinch-rollers and the capstans.
OneTouch Play
By pressing the TAPE A I_ or TAPE B I_ button, the System will
come on, and ira tape is in the deck, it will start to play. If no rope
is loaded, "NO TAPE" appears on the display, the System will
come on and wait for you to insert a tape, or select another function.
Playing a Tape
You can use either Deck A or Deck B at a time for playback.
1 Press the _ PUSH OPEN part for the deck
you want to use.
2 When the cassette holder opens, put a cas-
sette in, with the exposed part of the tape
down, toward the base of the Unit.
The tape will travel from the left to right.
Tape travelling direction
• If the cassette holder does not open, turn the System off,
then back on and press the _ PUSH OPEN part again.
3 Close the cassette holder gently.
When both Deck A and Deck B contain a tape, the last deck to
have a tape inserted is selected.
4 Press the TAPE A I_ or TAPE B I_ button.
The selected Deck appears (for example, TAPE-A) and the
Deck indicator "A" or "B" lights up on the display.
The Tape indicator (1_) blinks on the display and the tape is
played back.
The Cassette Deck automatically stops when one side of the
tape has finished playing.
To stop playing, press the • button.
To remove the tape, stop the tape, and press the _ PUSH
OPEN part to open the Cassette Hokter.
To Fast-Wind a Tape
During playback or in Stop mode, press the _ (FF) button on the
Unit to fast-wind the tape onto the right side of the cassette without
playing. (You can also use the I_1 button on the Remote Control.)
During playback or in Stop mode, press the _1_1 (REW) button on
the Unit to fast-wind the tape onto the left side of the cassette with-
out playing. (You can also use the I-,_t_ button on the Remote Con-
trol.)
During fast-winding the tape, the Tape indicator (1_) goes out.
During fast-winding, the status bar illumination at the bottom of
the display moves counterclockwise.
During rewinding, it moves clockwise.
• The Cassette Deck automatically stops when one side of the
tape has finished playing.
[3 During fast-winding the tape, you can change the tape travelling
direction by pressing the I_1_-(FF) or _1_1 (REW) button.
16
Loading ...
Loading ...
Loading ...