Furrion C-FOS07TAPK-009 User Manual

Loading ...

Installation

English

Good Signal

Poor Signal

Doorway Camera Installation (if

purchased)

1. Select a suitable mounting position where

you are going to install the doorway

camera. Mark a basic outline using the

provided bracket gasket. (Fig. 10)

Fig. 10

2. Drill a ⁄” center hole on the vehicle wall

using a ⁄” hole saw. (Fig. 11)

⁵⁄8”

Fig. 11

3. Feed the supplied 6-foot camera power

cable through the gasket. Ensure the bare

end of the cable goes into the vehicle and

the flat side faces inward. (Fig. 12)

Camera Power

Cable

Bracket

Gasket

Fig. 12

4. Fix the gasket and bracket to the vehicle

using four ⁄ ” flat self-tapping screws.

Make sure the camera power cable is not

wrapped or extruded. (Fig. 13)

Bracket

Fig. 13

5. Make sure the sealing lip around the edge

of the gasket is seated over the edge of

the bracket before fully tightening the

screws.

Loading ...

Furrion C-FOS07TAPK-009 Vision S 5" Display