Loading ...
Loading ...
Loading ...
8
ASSEMBLY INSTRUCTIONS
13. INSTALLATION WITHOUT THE LIGHT KIT (continued)-
Lift the light cap into the light kit and turn in a clockwise
direction until it is secure.
Light Kit
No Light Cap
13
14. Remove the battery cover from the back of the
remote found in the remote pack. Insert the battery
from the remote pack into the remote; ensure polarity
of battery matches the polarity indicated in the battery
compartment--positive (+) to positive (+) and negative
(-) to negative (-). Replace the battery cover and press the
HIGH SPEED button on the remote to ensure the remote
turns on the fan.
Note: If the remote does not turn on fan, see
TROUBLESHOOTING (page 10).
Battery Cover
Battery Compartment
Front
Back
High
Speed
14
15. If desired, the wall bracket in the remote pack can be
installed to a wall using the provided mounting screws.
Store the remote in the wall bracket when not in use.
Turn ON the electrical power at the main fuse or circuit
breaker and the wall switch.
Assembly is complete.
Mounting Screw
Wall Bracket
15
Loading ...
Loading ...
Loading ...