Loading ...
Loading ...
Loading ...
Downrod
Clip
Set Screw
Packing
Material
Yoke
Downrod
Pin
Downrod
5
ASSEMBLY INSTRUCTIONS
1
3
2. Loosen all four mounting bracket screws located on the
mounting bracket and completely remove the two screws
from the round holes in the canopy. Save the screws for
later. Remove the canopy from the mounting bracket.
Then, install the mounting bracket to the outlet box (sold
separately) using the screws and washers provided with
the outlet box.
WARNING: To reduce the risk of re, electric shock,
or personal injury, mount to the outlet box marked
“acceptable for fan support” and use the mounting screws
and washers provided with the outlet box.
3. Discard the orange packing material from the yoke at
the top the motor assembly.
Remove the downrod clip and downrod pin from the
downrod. Then, loosen but don’t remove the two set
screws at the top of the yoke.
Mounting Bracket Screw
2
4. Insert the downrod through the canopy and yoke cover.
Feed the wires from the fan through the downrod.
1. Turn OFF the electrical power at the main fuse or circuit
breaker.
DANGER: Failure to disconnect the power supply prior to
installation may result in serious injury or death.
Downrod
Canopy
Yoke Cover
Yoke
4
Loading ...
Loading ...
Loading ...