Loading ...
Loading ...
Loading ...
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity before servicing. Check appliance is safe when you have nished.
38
Ovens
5.1 To Remove the Tall Oven Inner Back
Open the tall oven door and remove the 2 screws and washers
securing the inner back to the back of the oven. Carefully lift
away the inner back.
Reassemble in reverse order.
Check the door for correct operation.
5.2 To Remove an Oven Thermostat
Disconnect from the electricity supply.
Remove the right-hand hotplate tray (see 2.1); for the left-
hand oven remove the left-hand side panel (see 1.2). Open the
appropriate oven door.
Main Oven
Unclip the thermostat phial from the clips at the front of the
oven roof. Disconnect tubing nut at rear of thermostat and
remove the screw(s) securing the thermostat to the gas rail.
Remove thermostat and gasket/seal. When tting replacement
thermostat use the new gasket/seal supplied.
Make sure that the capillary is clipped to the bracket at the
front of the oven roof.
Reassemble in the reverse order. Check the appliance is gas
sound. Check the operation of the thermostat.
Tall Oven
Remove the tall oven inner back (see 5.1). Unclip the
thermostat phial from the clips in the oven back.
Feed the thermostat capillary out of the oven. Disconnect the
wiring from the thermostat. Remove the 2 screws holding the
thermostat to the mounting panel. Fit the new thermostat and
reassemble in the reverse order. Make sure the phial is clipped
at the oven back with the phial centrally positioned between
the clips.
Reassemble in reverse order. Check appliance is electrically
and gas sound. Check operation of thermostat.
5.3 To Remove the Main Oven Burner
Open the oven door and remove the oven shelves. Remove
the securing screw at the right-hand end (Fig. 10.6). The
burner is held in place by dimples in the mounting bracket.
Slide the burner to the left and lift up, taking care not to
disturb or damage the 2electrodes.
Reassemble in reverse order. Check the 2 electrodes have not
been disturbed.
5.4 To Change the Main Oven Burner Assembly
Open the oven door. Disconnect the tube nut and tubing.
Remove the screw holding the oven burner assembly and
withdraw complete assembly (Fig. 10.7). Remove the oven
burner.
Fit the oven burner to new assembly. Replace the complete
assembly in the oven. Reconnect the tube and secure with the
tube nut.
Check the appliance is gas sound. Check the ame safeguard
device operation
Tube Nut
Oven Burner Assembly
Fixing Screw
Element fixing screws
ArtNo.321-0005 Fan oven element
Fig. 10.6
Fig. 10.7
Fig. 10.8
Loading ...
Loading ...
Loading ...