Loading ...
Loading ...
Loading ...
You can customize your cycles by selecting options.
OPllONS
HEADYOU'i'Y
m DEUCA'_
Damp Dry Signal
Select the Damp Dry Signal to alert you that your clothes are
approximately 80% dry. This is useful when you want to remove
lightweight items in a mixed load (to prevent overdrying), or
remove partially dry items that may need ironing.
NOTE: The Damp Dry Signal is an option that is only available
with Automatic cycle.
WRINKLE GUARD ®III
WRINKLE GUARD ®Ill prevents wrinkles that form when you
cannot unload the dryer promptly at the end of a cycle.
• Press WRINKLE GUARD _"_Ill to get up to 2V2hours of heat-
free, periodic tumbling at the end of a cycle.
• Stop WRINKLE GUARD ®Ill at any time by pressing the
WRINKLE GUARD ®Ill pad or opening the dryer door.
For the Perm Press/Casual Auto Dry cycle, WRINKLE
GUARD "_III is preset to "On." The other Auto Dry cycles will
retain the WRINKLE GUARD ®Ill setting. (For example, if you
select WRINKLE GUARD ®III in the Normal cycle, WRINKLE
GUARD _"_IIIwill be on the next time you select the Normal
cycle.)
NOTE: If you do not select WRINKLE GUARD "_III, the dryer stops
after Cool Down.
Touch Up
Select this option to remove wrinkles from clean items such as
clothes packed in a suitcase or items wrinkled from being left in
the dryer too long.
• Press TOUCH UP once to get HEAVY DUTY (30 minutes of
high heat). Use Heavy Duty for medium to heavyweight items
such as bedspreads and jeans.
• Press TOUCH UP twice to get DELICATE (20 minutes of low
heat). Use Delicate for light to medium weight items such as
blouses and skirts.
• Press MORE TIME or LESS TIME to adjust the cycle time.
• The WRINKLE GUARD "_III option is also available in Touch
Up. Remove clothes immediately when tumbling stops.
When you select a cycle, the preset Auto Dryness Level (Auto Dry)
or Timed Dry settings for that cycle will glow. Modifiers allow you
to change the preset settings and further customize your cycles.
Auto Dryness Level with Ultra Moisture Sensing
Auto Dryness Level with Ultra Moisture Sensing provides the
most accurate drying results in the shortest time. This can help
you save money on utility bills and reduce the risk of fabric
damage. Dryness level is determined by dual sensor strips that
measure the moisture in your clothes. Once the desired dryness
level is reached, the electronic sensors signal the dryer to stop to
prevent overdrying your clothes.
DRYERSTA_,JS
m DRYINB
1 COOLDOWN
I WRINI_EGUARD
I CHECKIJNT_flEEN
m MORE DRY
m
i NORMALDRY
I
m I._DRY m HIGH
l LOW
_OR_ MORETIME LESSTIME z _
END OF CYCLE
_/ULTR4MO_RE
5EN_N6 DMe_DRY
For all Auto Dry cycles, the Auto Dryness Level is automatically
set at Normal Dry. This setting provides the recommended fabric
care for your cycle. The display will show the estimated time (in
minutes) required to reach an approximate 80% dry level. After
the 80% dryness level is reached, the remaining drying time
required will be displayed as actual time remaining.
Use the Normal Dry setting to dry most loads. At the end of the
cycle, feel the dried clothes.
• If they are damper than you like, select a setting above
Normal Dry the next time you dry a similar load.
• If they are drier than you like, select a setting below Normal
Dry the next time you dry a similar load.
To change the dryness level
Press AUTO DRYNESS LEVEL until the desired dryness level
glows.
NOTE: Auto Dryness Level is not a selectable option with the
EXPRESS DRYTM cycle, the Air Dry cycle or Touch Up.
To change from estimated to actual drying time
Press MORE TIME or LESS TIME until the desired time is
displayed. The light for Timed Dry (Actual) will glow.
Timed Dry
Use Timed Dry to select a specific amount of drying time. The
preset settings for EXPRESS DRYTM, Air Dry and Touch Up are
automatically set to Timed Dry.
To change the time
Press MORE TIME or LESS TIME until the desired time shows in
the display.
End of Cycle Signal
The End of Cycle Signal produces an audible sound when the
drying cycle is finished. Promptly removing clothes at the end of
the cycle reduces wrinkling.
Press the END OF CYCLE SIGNAL pad to adjust the sound level
or turn off the signal.
NOTE: When WRINKLE GUARD '_III is selected and the End of
Cycle Signal is on, an audible sound will emit every five minutes
until the clothes are removed, or WRINKLE GUARD _ III is
finished.
16
Loading ...
Loading ...
Loading ...