Loading ...
Loading ...
Loading ...
1. Check to be sure all parts are now installed. If there is an
extra part, go back through the steps to see which step was
skipped.
2. Check to be sure you have all of your tools.
3. Dispose of all packaging materials.
4. Check the dryer's final location. Be sure the vent is not
crushed or kinked.
5. Check to be sure the dryer is level. (See "Level Dryer.")
6. Plug into a grounded 3 prong outlet. Turn power on.
7. Remove the blue protective film on the console and any tape
remaining on the dryer.
8. Read "Dryer Use."
9. Wipe the dryer drum interior thoroughly with a damp cloth to
remove any dust.
10. Set the dryer on a full heat cycle (not an air cycle) for 20
minutes and start the dryer.
If the dryer will not start, check the following:
• Dryer is plugged into a grounded 3 prong outlet.
• Electrical supply is connected.
• House fuse is intact and tight; or circuit breaker has not
tripped.
• Dryer door is closed.
11. When the dryer has been running for 5 minutes, open the
dryer door and feel for heat. If you do not feel heat, turn the
dryer off and check to see if the gas supply line shutoff valve
is open.
• If the gas supply line shutoff valve is closed, open it, then
repeat the 5-minute test as outlined above.
• If the gas supply line shutoff valve is open, contact a
qualified technician.
FEATURES AND
BENEFITS
AL ,JA : [L
The exclusive TOTAL CARE TM SYSTEM combines the KING
SIZETM load capacity, EVENHEATTM with Auto Temp Control,
WRINKLE GUARD_III, and the TUMBLE FREETM heated dryer rack
to ensure total drying care for any type of fabric and load size.
In automatic drying cycles, the temperature of the clothes is
reduced by automatically turning down the heat as the clothes
become dry. This reduces overdrying and provides better care of
the fabrics in your clothes.
The EVENHEAT TM with Auto Temp Control system for drying uses
dual moisture sensing devices and SENSOR SMART TM controls.
EVENHEAT TM with Auto Temp Control shortens drying time and
dries the load at lower temperatures for optimal fabric care. The
EVENHEAT TM with Auto Temp Control system monitors the
temperature of the heated air to ensure that it is never too hot to
cause fabric damage. It also terminates the cycle when the
clothes are dry to reduce shrinkage.
When the selected level of dryness is reached, the dryer goes
into a cool down period lasting 2-10 minutes. Unlike other dryers
that provide a fixed 10 minute cool down, the length of the
"Smart" cool down is based on the cycle time and selected
dryness setting.
• For small loads or loads that are dried at a lower temperature,
the cool down may be as low as 2 minutes.
• For large loads or loads that are dried at a higher
temperature, the cool down will be closer to 10 minutes.
12
Loading ...
Loading ...
Loading ...