Loading ...
Loading ...
Loading ...
GETTINGSTARTED
F63 / F6S CONSOLES
Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the power
switch located at the front of the treadmill below the motor hood. Ensure that the Safety Key is
installed, as the treadmill will not power on without it (see assembly step 7 for reference).
When the power is turned on, a message will scroll across the Message Window showing the
current software version. Then the Time and Distance Windows will display Odometer read-
ings for a short time, Time Window will show how many hours the treadmill has been in use
and the Distance Window will show how many miles (or Kilometers if the treadmill is set to
metric readings) the treadmill has gone.The treadmill will then enter idle mode, which is the
starting point for operation.
QUICK-STARTOPERATiO
1. Attach the Safety Key to wake display up (if not already on).
2. Press the Start key to begin belt movement then adjust to the desired speed using the
Speed A/T keys (console or handgrip).You may also use the Quick speed keys 2, 3, 4, 5, 6,
9 or 12 to adjust the speed.
3. To slow tread-belt press and hold the Speed T key (console or handgrip) to the desired
speed. You may also press the Quick speed adjust keys, 2 through 12.
4. To stop the tread-belt press Stop key or pull away Safety Key.
F63 / F65 TREADMILL 14
Loading ...
Loading ...
Loading ...