Loading ...
Loading ...
Loading ...
• ' F
#159. 5/16"x 3/4"
Button Head Socket
Bolts (4 pcs)
#75. Safety Key
158
1. Attach the Support tube (26) between the upright tubes (4 & 5) with four
Button Head Socket Bolts (159). Tighten bolts firmly.
2. Place the Beverage Holder (158) on top of the Support tube (26) as shown in
the illustration.
3. Place the magnet of the safety key (75) in between the Start and Stop
buttons (if it isn't already attached). The treadmill will not function without this
in place.
4. Check to make sure all bolts and screws are completely tightened.
120
2O
l #120. 5x16mm
Tapping Screws(6 pcs)
1. Finish tightening the button head bolts (from Step 2 above) that secure the
console masts to the frame.
2. Attach the Console mast covers (62 & 6:3) to the Frame Base (2) with six
Tapping Screws (120). Tighten screws using the Combination M5 Allen
Wrench & Phillips Head Screw Driver (131).
11 F63 / F65 TREADMILL
Loading ...
Loading ...
Loading ...