Loading ...
Loading ...
Loading ...
Unpacking and Checking Contents
To avoid injury from unexpected starting or
electrical shock, always remove plug from
power source when tool is not in use.
Table of Loose Parts
Item Description Qty.
A
Model 1680 Motorized Scroll Saw is shipped complete in B
one carton. C
1. Unpacking and Checking Contents. Separate all "loose
parts" from packing materials and check each item with
the "Table of Loose Parts" to make sure all items are
accounted for before discarding any packing material.
If any parts are missing, do not attempt to
operate Scroll Saw, plug in the power
cord or turn the switch on until the missing parts are
obtained and are installed correctly.
16" Scroll Saw .......................................................... 1
Owner's Manual ........................................................ 1
Loose Parts Bag (containing) .................................... 1
Allen Wrench (3 mm) ................................................ 1
Allen Wrench (5 mm) ................................................ 1
Blades .................................................................... 11
NOTE: Hardware to mount this Scroll Saw to a bench or
leg set is NOT supplied. See mounting instructions on
Page 15-16 for recommended hardware size.
To remove protective coating from the table surface,
moisten a soft cloth with kerosene and wipe off coating.
Do not use acetone, gasoline or lacquer thinner for this
purpose.
After removing protective coating, If you wish, you may
apply a coat of paste wax to the table to allow the work-
piece to slide easily across the table surface and deter
rust. Wipe the table thoroughly with a clean dry cloth.
C
PHILLIPS SCREWDRIVER
WRENCHES
7/16 in.
COMBINATION
SQUARE
Tools Needed
COMBINATION SQUARE MUST BE TRUE
Check its accuracy as illustrated below.
STRAIGHT EDGE OF
BOARD 3/4" THICK-
DRAW LIGHT LINE THIS EDGE MUST BE
ON BOARD ALONG PERFECTLYSTRAIGHT
THIS EDGE .3"']_ /
II
II
SHOULD BE NO GAPOR OVERLAPWHEN
SQUARE IS FLIPPEDOVER IN DOTTED POSITION
m
Loading ...
Loading ...
Loading ...