Loading ...
Loading ...
Loading ...
CARTON CONTENTS
1. Spring Tines (7)
2. Frame Assembly
3. Gauge Wheel
1
\
• Turn the frame assembly as shown in figure 1.
• Assemble the spring tines to the top of the frame
tube using seven 5/16" x 1-1/2" hex bolts, 5/16" flat
washers, 5/16" lock washers and 5/16" hex nuts.
(On sweepers smaller than 42", use only 5 spring
tines.) See figure 1.
• Assemble a vinyl cap onto each end of the frame
tube. See figure 1.
VINYLCAP
5116"x 1-1/2" _ ._
HEX B,OLT _"'>/./O -1
\
VINYLCAP
FIGURE 1
TOOLS REQUIRED FOR ASSEMBLY
(1) 7/16" Wrench
(2) 1/2" Wrenches
(2) 3/4" or Adjustable Wrenches
(1) Knife
REMOVAL OF PARTS FROM CARTON
• Remove all parts and hardware packages from the
carton. Lay out all parts and hardware and identify
using the illustrations on pages 3 and 4.
Assemble a 1/2" washer, the wheel, another 1/2"
washer and the 1/2" plain jam nut onto the 1/2" x 3-
1/2" hex bolt. See figure 2.
Insert the bolt through the welded bracket and
assemble the 1/2" nylock jam nut onto the bolt.
Adjust the nuts so that there is no end play in the
wheel and then tighten the nuts securely against
the welded bracket. Make sure the wheel still turns
freely. See figure 2.
Use this
42" & 46" sweepers
Use this hole for
smaller sweepers
1/2" NYLOCK
JAM NUT
1/2" JAM NUT
1/2" WASHER
HER
1/2" x 3-1/2"
HEX BOLT
FIGURE 2
4
Loading ...
Loading ...
Loading ...