Loading ...
Loading ...
Loading ...
18
9. Place the top hinge on the opposite side.
10. Place the door on the fridge, then loosely screw
the hinge without tightening completely.
11 Once the door is installed, adjust the hinge by
tightening the screws until the door is in the correct
place.
12. Replace the top hinge cover.
Note: The door seal may come out of its place when changing the door. If you notice gaps
between the seal and the fridge frame when the door is closed, pull carefully on the seal to
close these openings. The correct positioning of the seal is important to ensure the fridge is
waterproof.
Moisture control
This aging cellar has a moisture management system that uses water condensation. The
humidity varies between 50% and 80% on average. You can view it using the hygrometer built
into the digital display (see paragraph D Functions and temperature settings).
Humidity will vary according to several factors including the number of bottles stored, the
frequency in which the door is opened, changes to the set temperature, location of the cellar,
and according to the ambient temperature or weather. These factors will sometimes result
in excess moisture or conversely a lack of humidity.
If the humidity is greater than 80%, this does not affect the quality of the wine. Moisture will
cause excess condensation to become visible on the interior walls, shelves, labels or door. If
this occurs, you should wipe away excess moisture to avoid mold developing.
Conversely, if the humidity is less than 50%, it is advisable to temporarily compensate by
adding a small container filled with water at the bottom of the unit to restore the ideal
humidity.
Loading ...
Loading ...
Loading ...