Loading ...
Loading ...
Loading ...
maintenance
_WARNING: for your own safety, turn switch "OFF", I
remove key and removeplug from power source
I
outlet before maintaining or lubricating your saw.
GENERAL:
An Occasional coat of paste wax on trhework table will
allow the wood being cut to glide smoothly across the
work surface.
MOTOR
If the power cord is worn, cut or damaged in any way,
have it replaced immediately.
Do not attempt to oil the motor bearings or service the
motor internal parts.
ARM BEARINGS
Lubricate the arm bearings after 10 hours of use. Re-oil
after every 50 hours of use or whenever there is a squeak
coming irom the bearings.
1. Turn saw on its side.
2 Squirt a generous amount of SAE 30 oil around the
shaft end and bronze bearing.
3. Let the oil soak in overnight in this position.
41 Next day repeat the above procedure for the opposite
side of the saw.
i , ill i i i llll ii i
wiring diagram
H
i:' SWITCH
......=,,,,
I WARNING: To avoid fire or shock, use only recom- i
mended service parts and reassemble exactly as
I
originally assembled.
18
Loading ...
Loading ...
Loading ...