Loading ...
Loading ...
Loading ...
User Guide for the SIP-T48S IP Phone
60
2. Tap the gray box of the Key As Send field, and then select # or * from the pull-down list, or
select Disabled to disable this feature.
3. Tap the Save soft key to accept the change or to cancel.
Key as send is configurable via web user interface at the path Features->General Information.
Phone Lock
You can lock your phone temporarily when you are not using it. This feature helps to protect
your phone from unauthorized use.
When the phone is locked, the following you needed to know:
LCD screen and All keys are locked except the Volume key, digit keys, # key, * key, HEADSET key
and Speakerphone key. You are only allowed to dial emergency numbers, reject incoming calls
by pressing the X key or tapping the Reject soft key, answer incoming calls by lifting the
handset, pressing the Speakerphone key, the HEADSET key, the OK key or tapping the Answer
soft key, and end the call by hanging up the handset, pressing the Speakerphone key, X key or
tapping the End Call soft key.
Note
To activate the phone lock via phone user interface:
1. Tap ->Basic->Phone Lock.
2. Enter the desired PIN (default PIN: 123) in the Unlock PIN field, and then tap the Save soft
key or press OK.
3. Tap the gray box of the Lock Enable field, and then select Enabled from the pull-down list.
4. Enter the desired interval of automatic phone lock in the Lock Time Out field.
The default timeout is 0. It means the phone will not be automatically locked. You need to
long press to lock it immediately when the phone is idle.
The emergency number setting, if desired, must be made before lock activation. For more
information, refer to Emergency Number on page 127.
Loading ...
Loading ...
Loading ...