Loading ...
Loading ...
Loading ...
17
Saving Personal Settings
1.
When the proper drying cycle and additional functions are selected, you may store
these setttings by pressing the START/PAUSE button and holding it for five seconds.
An indicator light on the START/PAUSE button and an acoustic signal will confirm
your selection.
2.
SC (settings changed) will be displayed briefly on the display.
3.
Press the START/PAUSE button to start the drying process.
NOTE: The changed combination will appear every time you switch on the dryer. Follow the
same procedure to change a previously saved combination.
Low Standby Mode
The dryer will switch off automatically after 5 minutes to save energy, if you do not run a
drying cycle or do anything else after switching on the dryer. The indicator light on the
START/PAUSE button will flash.
Rotate the program selector knob or press the ON/ OFF button or open the dryer door to
reactivate the display. If you do not do anything for 5 minutes after the end of the program,
the display unit will be switched off as well. Indicator light on the START/PAUSE button will
flash.
P o = weighted power when off [W]
< 0.5
P I = weighted power when in standby [W]
< 0.5
T I = standby time [min]
5
MAINTENANCE AND CLEANING
CAUTION: Before cleaning, make sure to switch off the dryer, and unplug the power cord from
the outlet.
The dryer is fitted with a filtering system consisting of several filters that prevent any debris from
entering the heat exchanger system.
1.
Net filter
2.
Heat pump filter
3.
Condensation tank
NOTE: The dryer may never be operated without the filters in place or with damaged filters, as
an excessive amount of accumulated fibers from the fabric could cause malfunction or
failure of the dryer.
Loading ...
Loading ...
Loading ...