Loading ...
Loading ...
Loading ...
14
NOTE: If a power failure occurs during the Start Delay time period, press the START/PAUSE
button to resume the countdown.
The symbol will illuminate when the Start Delay setting is selected.
Anti-Crease
Use the Anti-Crease setting if you do not intend or cannot remove laundry from the dryer
immediately after the drying cycle finishes.
Press the Anti-Crease button (12) to choose a between one, two, or three hour setting. The
specific time setting will be indicated on the right side of the display.
Once the dryer door is opened, the Anti-Crease setting will be deactivated.
Child Lock
To activate and deactivate the Child Lock, press and hold the (9) and (12) buttons at the
same time, for at least three seconds, until the key symbol (11) lights up or turns off,
respectively.
When the child lock is activated, the dryer cycle or additional functions cannot be changed.
The child lock remains active even after the dryer is turned off. It must be deactivated before
a new drying cycle can be selected. It can also be deactivated during the drying cycle.
NOTE: Disconnecting the dryer from the power source will deactivate all settings, and the dryer
will reset to its default factory settings except for the signal loudness, anti-crease, and
child lock settings.
Loading ...
Loading ...
Loading ...