Loading ...
Loading ...
Loading ...
5
f. Please do not use it under the high humidity and temperature environment for long time.
g. Please turn off the speaker if long time not to use.
Unit power on: Slide the power switch to “on” position on rear panel to power on the unit,
and slide to off position to power off (display off ). Short press the power button on front
panel or remote controller to standby on/off the unit. Long press power button on front panel
can turn off the display; long press it again to turn on. Short press mode button to switch play
mode(FM/Bluetooth/USB/AUX IN) for starting operations. In case of you off the unit by side
the power switch on rear panel that you cannot power on the unit by remote controller
because the power is cut off completely.
Time setting: In standby mode, long press(2 seconds) mode button till the clock digits flash
on display to start the setting, rotate the volume knob to adjust the hour digits, press mode
button again skip to minute setting, rotate the volume knob to adjust it, and press play/pause
to finish and quit the setting.
Alarm setting: short press the alarm button on front panel until clock digits flash to start the
setting, rotate the volume knob to adjust the hour digits, and press alarm button again skip
to the minute setting. Use the same mothed like you did for hours to adjust and finish the rest
setting for minutes/alarm source(FM/USB/Beep)/alarm volume/alarm on/off, and press the
alarm button to finish the alarm setting. Long press (2 seconds) alarm button to turn on or off
the alarm setting. Please make sure the alarm clock symbol shows on display, which means
the alarm is on, and set up successfully.
Note:
a. The clock and alarm time may reset in case of battery power exhausted, and without DC
power connection. You may need set up it again after charging. We recommend to keep DC
power connection in order to avoid loss time.
b. When the alarm is activate due to alarm time is being, short press the power button to
cancel the alarm voice, and the unit will wake up you at same time in the coming of next day.
c. We suggest setting up the alarm volume over 15 level in order to avoid not loud enough for
alarming.
d. The alarm duration time is 1 hour, and will off automatically.
e. Please make sure the USB device is available and plug on the unit properly when you
choose USB as alarm source. Otherwise, the unit will switch to beep alarming.
f. You also can set up the clock and alarm by remote controller, which similar operation as
front panel.
g. Please do not cut off the unit power completely ( slide power ON/OFF switch on rear panel),
otherwise, the alarm cannot wake up. You can long press power button on front panel to turn
off the display, but alarm keep works for you.
Radio operation
Before listen to the radio, please fully extend the antenna and move the unit next to the
window in order to get better FM reception. Short press the standby button turn on/off the
radio. Rotate the volume knob to adjust the output volume level.
All-in-one scan(auto scan and save as preset station): long press(2 seconds) the
play/pause button to scan and save the available station automatically, max supported up to
60 preset stations. Short press the previous/next button to select and switch the preset
station. Short press play/pause button can mute the sound, press it again to resume the
output.
Loading ...
Loading ...
Loading ...