Loading ...
Loading ...
Loading ...
19
OTHER DIAGNOSTIC HELP AND A GUIDE FOR WHEN YOU SHOULD CALL FOR SERVICE
If you are having a problem with your washing machine, make sure you have followed ALL of
the instructions on page 18 in the “What to do” column before calling for service.
Description
Not filling with
water.
Flood.
Draining problem.
Loss of water,
while washing.
Water level
problem.
Motor fault.
Customer action (Summary)
Display Code
Wait a few minutes to see if the fault is corrected.
If not, press the Start/Hold To Pause touchpad and
hold it for 1.2 second to enter pause mode then
check the drain hose for blockage.
If the water is pouring onto the floor, turn OFF both
wall taps.
Make sure both wall taps are on and hose filters are
not blocked.
Press Start/Hold To Pause to re-start wash.
If problem remains, call Service.
Raise drain hose if water is flowing out of drain hose.
Wait a few minutes to see if the fault is corrected.If
not, call Service.
Press Start/Hold To Pause to continue the wash.
If problem remains, call Service.
If water level in wash bowl is low and water is flooding
the floor, turn Program Selector Knob to Drain & Spin
position, then press Start/Hold To Pause.
Should this make things worse, press the power
button off (some models) and call Service.
Wait, this fault may clear itself.
If not, turn Program Selector Knob to Drain & Spin
position, then press Start/Hold To Pause to drain the
wash bowl.
If not, turn Program Selector Knob to Drain & Spin
position to drain the wash bowl.
You may have to press Start/Hold To Pause to
commence draining.
If this problem is repeated, call Service.
Wait, this fault may clear itself.
If this problem is repeated, call Service.
Otherwise, press Start/Hold To Pause to continue the
wash.
Loading ...