Loading ...
Loading ...
Loading ...
8
ASSEMBLY INSTRUCTIONS
15
13. Loosen all three tter plate screws, but completely
remove the one located across from to the reverse switch.
14. Then, connect the single-pin connectors from the
tter plate to the light kit -- blue to black and white
to white. Align the keyhole slots in the light kit with
the loosened screws in the tter plate. Turn light kit
clockwise and replace the previously removed tter plate
screw. Tighten all screws.
14
Single-pin
Connector
Glass Bowl
Bulb
Light Kit
Fitter Plate Screw
Keyhole Slot
Fitter Plate
Fitter Plate
Screw
Reverse
Switch
Remove
13
15. Install the E26-base LED bulbs into the sockets of the
light kit.
Important: Make sure you allow the bulbs and light kit to
cool before you replace the bulbs.
Attach the glass bowl to the light kit by twisting the glass
bowl rmly in a clockwise direction until it is secure.
CAUTION: Avoid cross-threading the glass during
installation. Improper installation could cause the glass
bowl to be dicult to remove or fall, which could cause
serious injury.
16
16. Turn ON the electrical power at the main fuse or circuit
breaker and the wall switch.
Assembly is complete.
Loading ...
Loading ...
Loading ...