Greenworks 2600502 Owner’s Manual

Loading ...

ELECTRICAL

ELECTRICAL INFORMATION (See Figure 1)

W A R N I N G

To avoid electrical hazards, re hazards, or damage to the tool, use proper circuit protection. The

Snow Thrower is wired at the factory for 120 V operation. Connect to a 120 V, 15 A circuit and use

a 15 A time delayed fuse or circuit breaker. To avoid shock or re when the power cord is worn, cut,

or damaged in any way, replace it immediately.

This Snow Thrower has a 3-prong plug that is intended for use on a circuit that has a receptacle

like the one illustrated in Fig. 1.

Do not modify the power cord plug. If it does not match the electrical outlet, have the proper

outlet installed by a qualied electrician.

W A R N I N G

To avoid injury, when servicing the Snow Thrower, use only identical replacement parts.

GROUNDING INSTRUCTIONS

IN THE EVENT OF A MALFUNCTION OR BREAKDOWN, grounding provides the path of least

resistance for electrical current and reduces the risk of electric shock. This tool is equipped with

an electric cord that has a POLARIZED plug. The plug MUST be plugged into a matching outlet

that is properly installed and grounded in accordance with ALL local codes and ordinances.

DO NOT MODIFY THE PLUG PROVIDED. If it will not t the outlet, have the proper outlet

installed by a qualied electrician.

EXTENSION CORD

W A R N I N G

In order to reduce the risk of electric shock when operating this Snow Thrower, use only a CSA

listed extension cord that is approved for outdoor use, such as Type SJTW, 16AWG, and that has a

lower temperature rating of -40° F (-40° C).

Fig. 1

1) 3-prong plug

2) Receptacle with grounding conductor

Loading ...

Greenworks 2600502 13 Amp 20-Inch Corded Snow Blower