Loading ...
Loading ...
Loading ...
POWER
To activate or deactivate all the functions including all lighting types
and heating modes.
FLAME
To activate or deactivate the flame.
DIMMER
To adjust the brightness of flame (5 different light variants
adjustable)
CANDLE
/CHARCOAL
When the HEAT is on, the CANDLE/CHARCOAL light illuminates constantly and
cannot be turned off. When the POWER is on and the HEAT is off, the
CANDLE/CHARCOAL can be turned off.
Note:Through the button can adjust the light flashing mode.When the power is on
the light is steady, when press button one time the light flashing.
HEAT I/II
Press the HEAT button one time to enable the fireplace to operate at 750 watts.
Press it the second time to enable the fireplace to operate at 1, 500 watts. Press it
the third time to shut down the fireplace.
FLAME SPEED
Control Flame speed
5 Settings:(L1-L2-L3-L4-L5) flame speed from L1 to L5
L5 is the fastest setting.
NOTICE: When the heater is first turned on, a slight odor may be present. This is normal and should not occur
again unless the heater is not used for a long period of time.
NOTICE: To improve operation, aim the remote control at the front of the fireplace. DO NOT press the buttons
too quickly. Give the unit enough time to respond to each command.
Please put the heater 2.9 inches--4.5 inches (75mm--115mm)
away from the wall for a more realistic flame effect.
Loading ...
Loading ...
Loading ...