Loading ...
Loading ...
Loading ...
User instructions
27
PROFESSIONAL PROGRAMS OPTION
Enables operation in Professional mode, giving access to 4 extra programs,
with the times and performances usually associated with professional
dishwashers.
To activate the option, first select the “basic” program corresponding to the
professional cycle required.
N.B.: the highest power and shortest times will be obtained with
dishwashers connected to the highest power supply and hot water (see
electrical and water supply hook
-
up instructions).
½ LOAD FLEXI ZONE
(if present)
Ideal if just a few dishes need to be washed, allowing energy savings. The
dishes should be placed in both baskets and less detergent should be
placed in the detergent dispenser compared to the amount used for a full
load.
DRY ASSIST (if
present)
It starts automatically if the selected program is compatible with the option.
It can be disabled before starting the program.
The door opens automatically, allowing the dishes to be dried perfectly
even at low rinse temperatures, and therefore resulting in significant
energy savings. The first part of the drying cycle takes place with the door
closed. The door then opens automatically by a few centimetres. Any
intervention (opening / closing the door, switching off etc.) during the
drying cycle (both when the door is closed or open) will end the program
early.
The program can be interrupted during the drying cycle and the
dishwasher can unloaded before the cycle has completely ended, which
is indicated by a visual and/or audible alarm (depending on the model),
but best drying results may not be obtained.
The complete program ends only when indicated by a visual and/or
audible signal (depending on the model).
There must be sufficient space available for the door to open. The
door must not be forced open and closed before the wash cycle has
ended completely.
Loading ...
Loading ...
Loading ...