Loading ...
Loading ...
Loading ...
8
PACKAGING
Remove all packaging.
Please sort the materials in compliance with local recommendations (see chapter "DISPOSAL").
CLEANING
Disconnect the dryer from the power mains and open the door towards you. Before using the dryer for the fi rst
time, clean the dryer drum using a soft damp cotton cloth and water.
No program can be started while the door is open.
CHOOSING THE LANGUAGE
When the dryer is connected (see chapter "INSTALLATION AND CONNECTION") and switched on for the
fi rst time, choose the preferred language:
1. Use the program selector knob or buttons to scroll the list of languages.
2. Confi rm the selection by pressing the "Set" button.
For further drying process, see chapter "DRYING PROCESS, STEP BY STEP (1–7)".
STEAM PROGRAMS
If you select one of the steam programs as the fi rst program to be run with your dryer, fi rst add distilled water
to the steam generator tank (min.=0,3 l; max.=1,5 l); the dryer needs the distilled water to generate steam.
If the steam generator tank is empty, none of the steam programs will be available.
"LOW" will be indicated on the display (empty steam generator tank). As you use your dryer, the system will
be fi lled automatically with condensed water extracted during the drying process.
Only use distilled water. Use of regular tap water or any additives is forbidden. Limescale may damage
the heater. Such damage is not covered by the warranty.
Only add distilled water when the appliance is switched on and one of the steam programs is selected
(but before you start the program). Otherwise, the level sensor will not operate and water may overfl ow to the
dryer interior.
BEFORE USING THE APPLIANCE FOR THE FIRST TIME
Loading ...
Loading ...
Loading ...