Loading ...
Loading ...
Loading ...
39
EMPTYING THE STEAM GENERATOR TANK
Before transporting a dryer that has been previously used, the steam generator tank must also be
emptied. Otherwise, water from the tank may spill into the dryer interior.
1
Move the dryer approximately 40 cm away from
the wall and tilt it backwards.
2
The steam generator tank discharge (emptying)
plug is located on the bottom (front left-hand side).
3
Place an empty vessel under the plug
(approximately 2 litres) and pull out the plug.
4
When the water is discharged, reinstall the plug
(if the plug is not reinstall, water will spill from the
dryer during the next drying cycle).
Loading ...
Loading ...
Loading ...