Loading ...
Loading ...
Loading ...
INSTALLATION
- 6 -
DOOR REVERSAL INSTRUCTIONS
Loosen the triangular bracket cover by pushing the
bracket cover towards the back of the wine and
beverage center and simultaneously pulling up.
Remove the metal bracket by unscrewing the three
screws.
Rotate door 180° so that the handle is on the
opposite side.
Gently remove the plastic hole insert plugs from
the left side of the wine and beverage center with a
thin athead screwdriver. Save the plugs for Step 11.
Slide the cover towards the front of the wine and
beverage center and lift off.
Lift and remove the door.
IMPORTANT: NEVER LAY THE WINE AND BEVERAGE CENTER ON ITS BACK.
The compressor and motor components are installed at the back of the wine and beverage
center and may easily be damaged if the unit is placed on its back.
TOOLS NEEDED: Phillips screwdriver #2 or 5/16" (8 mm) socket tool and thin athead screwdriver.
The wine and beverage center is shipped with the door hinge brackets attached on the right side.
The door may be reversed to allow opening from the left side.
If you plan on reversing the door hinges, DO NOT plug the wine and beverage center into the
power outlet.
REMOVE GLASS SHELVES BEFORE REVERSING THE DOOR.
2
4
6
1
3
5
Loading ...
Loading ...
Loading ...