Troy-Bilt 31AE6GQ3711 2-stage Snow Blower

Operator's Manual - Page 8

For 31AE6GQ3711. Also, The document are for others Troy-Bilt models: 8526, 9528

PDF File Manual, 28 pages, Read Online | Download pdf file

31AE6GQ3711 photo
Loading ...
Loading ...
Loading ...
SECTION3: KNOWYOURSNOWTHROWER
Drive Control
Electric Starter Button
Gas Cap
Oil Fill
Chute Assembly
Clean-out_
Tool
Shift Lever
Chute Directional Control
/
Auger Control
f EngineControls
Electric Starter Outlet
Ignition
Key
Spark Plug Cover
Recoil Starter
Handle
Choke
Control
Augers
Skid Shoe
Throttle
Control
,J
,_ WARNING: Read, understand, and follow
all instructions and warnings on the machine
and in this manual before operating.
NOTE: For detailed starting instructions and more
information on all engine controls, refer to the
Tecumseh Engines manual packed separately and
StartingTheEngineon page 10 of this manual.
ShiftLever 6
The shift lever is located on the right side
of the handle panel. Place the shift lever
into any of eight positions to control the
v
direction of travel and ground speed, j
Ferward
There are six forward (F) speeds.
Position one (1) is the slowest and U
position six (6) is the fastest.
Reverse
There are two reverse (R) speeds. One
(1) is the slower and two (2) is the faster. F 1
GasCap
Unthread the gas cap to add gasoline to
the fuel tank.
R1
ChokeControl
J/l
The choke control isfound on the rear of the engine and
is activated by rotating the knob clockwise. Activating
the choke control closes the choke plate on the
carburetor and aids in starting the engine.
ThrottleControl
The throttle control islocated on the
engine. It regulates the speed of the
engine and willshut off the engine when
pushed down completely.
Primer
Depressing the primer forces fuel directly
into the engine's carburetor to aid in cold-
weather starting.
0il Fill
Engine oil level can be checked and oil
added through the oil fill.
©
m
/
@
Loading ...
Loading ...
Loading ...