Loading ...
Loading ...
Loading ...
422686
While the display P2 is fl ashing, use the + and – keys (C and D) to
select the cleaning level (P1, P2, or P3). The indication of the self-
cleaning duration is changed accordingly; cleaning duration cannot
be changed manually.
Press the temperature selection key (B) to confi rm the selected
self-cleaning level and to launch the self-cleaning program. As the
program is started, the light in the oven goes off. Countdown of the
self-cleaning program duration is started on the time display (6).
Cleaning level can be changed subsequently by pressing the
temperature selection key (B). The indication of the currently
selected cleaning level will start to fl ash. As long as the indication
is fl ashing, + and – keys (C and D) can be used to change the
selected cleaning level. Confi rm your selection by pressing the
temperature selection key (B); if no key is pressed, the selected level
is automatically confi rmed and activated after a few seconds.
For your safety, the oven door is automatically locked several
minutes into the oven self-cleaning cycle. As long as the door is
locked, LOC is indicated on the temperature display (8) (Figure 3).
The door will remain unlocked approximately thirty minutes after the
end of the program. When the door lock is deactivated after the self-
cleaning program, a short beep will be sounded, and “End” will be
indicated on the temperature display (Figure 4). Then, the program
selector dial may be turned back to the “off” position.
Do not attempt to open the oven door while the self-
cleaning cycle is in progress. The self-cleaning cycle may
be interrupted. Danger of burning!
When the oven door is unlocked after pyrolitic cleaning,
wait for the oven to cool down. When the oven has cooled
down, use a damp cloth to clean it. Wipe the oven door in
the seal area, and the surfaces near the edges. Do not rub
or scrub the seal!
The oven door seal is not removable. Therefore, the
manufacturer shall not be responsible for any damage to
the seal caused by its removal.
Cleaning the oven utensils and accessories
Pyrolitic self-cleaning programs may also be used to occasionally
clean the baking sheets supplied. After use, clean them as normally
with liquid detergent and wipe them with a cloth. Then, insert them
into the oven guides / rails.
fi gure 4
fi gure 3
34
Loading ...
Loading ...
Loading ...