Asko OP8611A 600mm/60cm Electric Wall Oven

User Manual - Page 11

For OP8611A.

PDF File Manual, 48 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
422686
The oven starts to operate immediately and stops operation at the
set time. An intermittent beep will sound, which can be stopped by
pressing any key; if no key is pressed, the beep stops after one
minute.
The symbol (1) and the sign (_:_ _) will ash. If you wish to
resume cooking, press the (A) sensor key and set a new duration
if necessary.
Setting the oven delayed start
With this operation mode, two settings have to be made: cooking
time (duration of oven operation) and cooking end time (tie at which
the operation should stop).
Cooking end time can be delayed by a maximum of 24 hours relative
to the current time of day.
Make sure the current time of day is set correctly.
First, set the cooking time: Press the (A) sensor key to select the
symbol (1). Use the (C) and (D) sensor keys to set the duration /
cooking time.
Then, set the cooking end time: Use the (A) sensor key and select
the symbol (2). (A sum of the current time of day and the oven
operation time is automatically shown on the display). Press the
(C) and (D) sensor keys to set the cooking end time.
The timer will wait for the start of the cooking – both symbols (1
and 2) are lit.
Turn on the oven (set the selector knob and cooking temperature).
At the corresponding time, the oven starts operating automatically
(the symbol (2) goes off upon the start of operation), and switches
off when the set cooking time has elapsed. An intermittent beep
will sound, which can be stopped by pressing any key; if no key is
pressed, the beep stops after one minute.
The symbol (1) and the sign (_:_ _) will ash. If you wish to
resume cooking, press the (A) sensor key and set a new duration
if necessary.
Setting the alarm timer
The clock can also be used independently of the oven operation,
as an alarm timer that sounds an alarm after the expiration of a
preset time.
Use the (A) sensor key to select the symbol (3). Then, use the
(C) and (D) sensor keys to set the time before the alarm sounds.
Maximum setting allowed is 10 hours.
When the set time has elapsed, an intermittent beep will sound,
which can be stopped by pressing any key; if no key is pressed,
the beep stops after one minute. The symbol (3) will go off.
The last minute of the timer countdown is displayed in
second intervals.
11
Loading ...
Loading ...
Loading ...