Loading ...
Loading ...
Loading ...
INSTALLATION INSTRUCTIONS
Introduction
Read these installation instructions
completely and carefully. They will save
you time and effort and help to ensure
optimum dryer performance. Be sure to
observe all listed warnings and
cautions.
WARNING - Risk of Fire.
Clothes dryer installation must be
performed by a qualified installer.
Install the clothes dryer according
to the manufacturer's instructions
and local codes.
Do not install a clothes dryer with
flexible plastic venting materials. If
flexible metal (foil type) duct is
installed, it must be of a specific
type identified by the appliance
manufacturer as suitable for
clothes dryers. Flexible venting
materials are known to collapse,
be easily crushed and trap lint.
These conditions will obstruct
clothes dryer airflow and increase
the risk of fire.
To reduce the risk of severe injury
or death, follow all installation
instructions.
SAVE THESE INSTRUCTIONS.
In addition to these instructions the
dryer must be installed in accordance
with all local codes or, in the absence
of a local code:
In the U.S.A., in accordance with
the National Electric Code,
ANSI/NFPA70 -latest
edition/State and Municipal codes
and/or local codes.
Information concerning
waste disposal
Disposal of the packaging
Keep children away from the
shipping carton and packaging
componentsto avoid risk of
suffocation.
All packaging materials are
environmentally friendly and can be
reused. Please dispose of packaging in
an environmentally friendly manner.
Please ask your dealer or inquire at
your local authority about the best
means of disposal.
Disposal of the old appliance
If the appliance is no longer
usable, pull out main plug, cut off
power cord and discard with
main plug. To prevent children
from locking themselves in the
appliance, remove the door.
Old appliances are not worthless
rubbish! Valuable raw materials can be
reclaimed from environmentally friendly
recycling.
Please ask your dealer or inquire at
your local authority about the best
means of disposal.
Before installing the dryer
Before installing the dryer to a
previously used ductwork system,
make sure the system is clean.
Professional ductwork cleaning is
recommended annually and also when
attaching your dryer to a previously
used ductwork system.
Maintaining clean ductwork will reduce
drying time and will improve drying
performance.
Unpacking the appliance
The dryer is very heavy, Do not
lift it by yourself. Do not lift the
appliance by projecting
components (e.g. door) - due to
risk of breakage.
Remove the appliance
packaging carefully to prevent
damage to appliance surfaces
and adjacent areas.
Check the dryer for transportation
damage. Do not install a dryer which is
visibly damaged. If in doubt, contact
your dealer.
Supplied components
The dryer is supplied without
a power cord. Thepower cord
must be connectedby a qualifed
technician or a licensed
electrician.
After removing the packaging,
immediately remove any objects
from the drum.
7
Loading ...
Loading ...
Loading ...