Loading ...
Loading ...
Loading ...
8
Programming Shut Off -
• When the appliance is running, press the button, the screen will display 1-24 hours
• Press several times until the corresponding time is displayed.
• Wait about 5 seconds, the timer will be active, then the “Timer” symbol is displayed on
the screen.
• Press the Timer button again, the timer will be canceled, and the “Timer” symbol will
disappear from screen
TIPS FOR CORRECT USE
To get the best performance from your appliance, follow these recommendations:
• Close the windows and doors in the room to be air conditioned (Fig. 1). When installing
the appliance semi-permanently, you should leave a door slightly open (as little as 1/2“) to
guarantee correct ventilation.
• Protect the room from direct exposure to the sun by partially closing curtains and/or blinds
to make the appliance much more economical to run (Fig. 2).
• Never rest objects of any kind on the appliance.
• Do not block the air inlet or outlet of the appliance.
• Reduced air flow will result in poor performance and could damage the unit (Fig. 3).
• Make sure there are no heat sources in the room.
• Never use the appliance in very damp rooms (bathroom for example).
• Never use the appliance outdoors.
• Make sure the appliance is standing on a level surface. If necessary, place the caster locks
under the front wheels.
Water drainage method
When there is excess water condensation inside the unit, the appliance stops running and
shows “ ”. This indicates that the water condensation needs to be drained using the
following procedures:
Manual Draining
1. Power o and unplug the unit from power source.
2. Place a pan under the lower drain plug.
3. Remove the lower drain plug.
4. Water will drain out and collect in the pan.
5. After the water is drained, replace the lower drain plug firmly.
6. Turn on the unit.
Do not
cover
appliance
Close curtains
Close doors
and windows
1. 2. 3.
Drain
Cap
Pan
Drain
Outlet
Loading ...
Loading ...
Loading ...