Loading ...
Loading ...
Loading ...
5
Let’s get started!
Installation & Assembly Instructions for Model: TPW06CR19
(For model TPW08CR19 see page 9)
Step 1: Assemble and attach the exhaust hose
• Extend both sides of the hose. (Fig. 1a)
• Screw on the hose inlet (Fig. 1b)
• Screw on the hose outlet (Fig. 1c)
• Attach the exhaust hose by sliding the hose outlet from the top down into the air
outlet grille. (Fig. 1d)
1a. 1b. 1c. 1d.
Step 2: Window Slider Kit Installation
Parts Needed:
A. Panel
B. Panel with one hole
C. Screw or plastic pin
Assembly
1.
Slide Panel A into Panel B and size to window width. Windows sizes
vary. When sizing the window width, be sure that the window kit
assembly is free from gaps when taking measurements. If necessary,
cut Panel B down to size. Cut on the side opposite the hole.
2. Lock the screws into the holes that correspond with the width that
your window requires to ensure that there are no gaps in the window
kit assembly after installation.
A
A
B
B
C
C
Loading ...
Loading ...
Loading ...