Loading ...
Loading ...
Loading ...
21
Continuous drainage
When unit is running in Dry mode, you can use the method below for continuous drainage.
1. Power o and unplug the unit from the power source.
2. Remove the drain plug (Fig. 1). While doing this operation some residual water may spill so
please have a pan to collect the water.
3. Connect a drain hose (Fig. 2). Note: Drain hose is not included.
4. The water can be continuously drained through the hose into a floor drain or bucket.
5. Turn on the unit.
IF DISPLAYED WHAT SHOULD I DO?
Probe Failure
(sensor malfunction)
If this is displayed, contact
customer service
Full Tank
(condensation reservoir full)
Empty the internal safety tank,
following the instructions
in the “End of season
operations” paragraph.
1. 2.
Loading ...
Loading ...
Loading ...