Loading ...
Loading ...
Loading ...
22
How to Replace the Filter
Before replacing the filter, detach the connecting tube of the filter
you wish to replace.
Detach the connecting tube using an appropriate tool (fitting separator). Damage to the
fitting and/or connecting tube may cause water leak.
6
How to Replace the Filter (CUCKOO Filter (genuine) must be used)
Connect the outlet of the previous filter to the inlet of the replaced filter and
connect a separate water extraction tube to the outlet of the replaced filter. Then,
open the tap water supply valve to allow water to pass through.
Especially for the SEDIMENT, allow water to pass through for about 5 minutes.
Connect PRE CARBON 2.0 NATURAL 2.0 to the previous filters, and allow water to pass
through for about 7 minutes.
Connect the RO to the previous filters, and allow water to pass through for about 10
minutes.
※ In case of RO, let the water pass through the external drain water control valve.
※ In case of RO, be careful as there are two water outlet each for purified water and drain water.
Allow plenty of water to pass through or else it will affect the taste and quality of water.
It is important to supply the purifier with water to check for any water leaks after filter
replacement.
7
Fitting Separator
Open
Open
Inlet
Outlet
Loading ...
Loading ...
Loading ...