Loading ...
Loading ...
Loading ...
pg-8
WORKSafe
©
AlcoLimit
©
In NORMAL MODE operation a 3 decimal place result will
appear on the display and remain for 15 seconds.
eg. 0.051%BAC
If you wish to retest, press the On/O button again.
In FAST MODE operation either the word PASS or FAIL
will appear on the display indicating the presence or
absence of alcohol.
The PASS level is 0.000 %BAC by default but can be
custom set at any level to suit your organisation upon
request. eg. 0.020%BAC or 0.050%BAC
In FAST MODE the breathalyser will automatically reset
for the next test.
Turning o the power
The breathalyser will turn o automatically after 15 seconds of non-use.
To force the breathalyser to shut-down, press and hold the on/o button for 3 seconds until the
display counts down and the breathalyser turns o.
IMPORTANT INFORMATION
This device is tested as a 0.05% BAC device (0.05%BAC is equal to 0.05grams of alcohol per 100ml of
blood).
ALCOLIMIT WORKSafe has a range of 0.000-0.500 %BAC.
PLEASE NOTE: Alcohol vapour on your breath will cause a higher reading. We recommend having a glass of
water prior to testing and waiting at least 20 minutes after your last drink for accurate results. Not waiting the
required 20 minutes will saturate the sensor unnecessarily and may cause sensor damage. This is not covered
under your warranty. Please always wait 20 minutes after consuming any alcohol to avoid this problem.
Version 1.1
Loading ...
Loading ...
Loading ...