Craftsman 917270623 42" automatic mower with electric start

OWNER'S MANUAL - Page 26

For 917270623. Also, The document are for others Craftsman models: 917.270623

PDF File Manual, 60 pages, Read Online | Download pdf file

917270623 photo
Loading ...
Loading ...
Loading ...
Connect the other end ofthe BLACK
cable to good CHASSIS GROUND,
aw_ayfrom fuel tank and battery.
TO REMOVE CABLES, REVERSE
ORDER -
BLACK cable first from chassis and
then from the fully charged battery.
RED cable last from bothbattedes.
PositiveTerminal NegativeTerminal
Seat
BatteryBox
Door
Battery
Positive Terminal Negative Terminal
REPLACING BATTERY
&CAUTION: Do not short battery termi-
nals by allowing a wrench or any other
object to contact both terminals at the
same time. Before connecting battery,
mm0ve metal bracelets, wdstwatch
bands,tings,etc. -
Positive terminal must be connected first
to prevent sparking from accidental
groundin_
Lift seat pan to raised position and open
battery box door.
Disconnect BLACK battery cable first
then RED battery c_ble and carefully
remove battery from tractor.
Install new battery with ta_inals in
same position as old battery.
First connect RED battery cable to posi-
tive (+)terminalwithhexboltandkops
nutas shown."l'_htensecurely.
Connect BLACK grounding cable to
negative (-) terminal with remaining hex
bolt and keps nut.Tighten securely.
Close battery box door.
(Red)Cable (Black)
TO REPLACE HEADLIGHT BULB
Raise hood.
Pull bulb holder out of the hole in the
backside of the gdll.
Replace bulb in holder and push bulb
holder securely back into the hole in the
backside of the gdll.
Close hood.
INTERLOCKS AND RELAYS
Loose or damaged widng may cause your
tractor to run poorly,stop running, or pre-
vent it from starting.
Check widng. See electdcal widng dia-
gram in the Repair Parts section of this
manual.
TO REPLACE FUSE
Replace with 30 amp automotive-type
plug-in fuse. The fuse holder is located
behind the dash.
26
Loading ...
Loading ...
Loading ...