Loading ...
Loading ...
Loading ...
PAGE 8 • SET UP & USE
ENGLISH
For models with pre-installed handle-moun rews on the faces of the doors:
1. Remove door handles and screws fr s.
3. Rotate door handle toward the space between the doors.
4. Install screws from par hten fully.
5. Repeat above steps for remaining door.
6. With both handles mounted, visually align handles, car hten screws.
DOOR HANDLE INSTALLATION
For models without pre-installed handle-moun rews on the faces of the doors:
1. Remove door handles, screws and handle trim pieces fr s.
2. Mount the tapered end of the handle to the door face using one of the two door face screws from the door
handle bag.
4. Repeat above steps for remaining door.
5. With both handles mounted, visually align handles, car
hten screws.
6. A rim pieces to handles.
When reversing doors:
2. Immediately center the badge over screw hole in opposite side of door and press firmly
LOGO BADGE RELOCATION
to secure it. (Screw may need to be loosened slightly if handle is difficult to slide on).
Loading ...
Loading ...
Loading ...