Loading ...
Loading ...
Loading ...
LEVELING YOUR REFRIGERATOR
HSILGNE
PAGE 6 • SET UP & USE
INSTALLATION GUIDE CONT.
Front Grille
PROPER AIR CIRCULATION
• e oT nsure your refrigerator works at the maximum efficiency it was designed
for, you should install it in a locaon where there is proper air circulaon,
plumbing and electrical connecons. Your refrigerator is not designed to operate
in temperatures below
55˚F (12˚C) or above 95˚F (35˚C).
• Do not install your refrigerator in any loca
on not properly insulated or
heated, e.g. garage, etc..
Keep out of direct sunlight and away from hea
ng sources such as radiators,
heaters, and cooking appliances.
• The following are recommended clearances around the refrigerator:
Sides and Top……………1” (25mm)
Back..................2" (50mm)
• All four corners of the cabinet must rest firmly on the floor.
• The cabinet must sit level from side to side.
seal properly.
• Turn leveling legs to raise or lower the cabinet.
TOOLS NEEDED FOR INSTALLATION
DO NOT USE POWER TOOLS TO INSTALL DOOR HANDLES!
OVERTIGHTENING THE SCREWS COULD STRIP THE THREADS!
Phillips Screwdriver
Pliers
5/16 and 3/8 Wrenches or Adjustable Wrench
PARTS INCLUDED
PARTS INCLUDED MAY DIFFER BASED ON UNIT PURCHASED
For mode
screw installed on the faces of the doors, the parts
included will consist of:
• 2 Handles
• 1 Front grille
• 4 Door edge handle
screws
• Owner’s manual
For models that don’t come wit
screw installed on the face of the door, the parts
included will consists of:
• 2 Handles
• 1 Front grille
• 2 Door face handle moun
ng screws
• 4 Door edge handle moun ng screws
• Owner’s manual
• 2 Handle cover/trim pieces
Loading ...
Loading ...
Loading ...