Loading ...
Loading ...
Loading ...
DRYER USE
MODIFIERS
STATUS
Damp !Cool Down
Wrinkle Guard 0
Check Lint Screen O
More I More
Time
Normal
C) Less
(2)
Less Auto Dry
Time LeveU
Auto Dry Cycles
OPTIONS
¢'_ Wrinkle
Guard
Damp Dry
On Signal
[AutoCycles0nly}
O Loud
O Soft
O off
Signa0 Volume
i!i/
Explosion Hazard
Keep flammable matedams and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
flammabme on it (even after washing).
Failure to folow these instructions can result in death,
explosion, or fire.
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this appliance.
The following is a guide to starting your dryer. Periodic references
to other sections of this manual provide more detailed
information.
1. Clean lint screen before or after each cycle. See "Cleaning
the Lint Screen."
2. Put laundry into dryer and shut door. See "Loading."
3. Select the cycle you want by pressing the selected cycle pad.
See "Cycles." The preset settings for Auto Dry or Manual Dry
will glow. The estimated or actual cycle time (in minutes) will
show in the display.
• The preset settings provide the recommended fabric care
for your selected cycle. For preset cycle settings, see
"Drying and Cycle Tips."
16
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of oH on
it (incmuding cooking oils).
Items containing foam, rubber, or pmastic must be dried
on a cmothesHne or by using an Air Cycle.
Fa/ure to follow these instructions can resuff in death
or fire.
4,
5.
6.
• If desired, you can change the Auto Dry (Estimated) time
by pressing AUTO DRY LEVEL until the desired level of
dryness and estimated dry time are displayed. The Auto
Dry Level saves you time by providing the best drying
results in the shortest time. Electronic sensors determine
the dryness level of your clothes. When your clothes are
almost dry, the drying time automatically changes from
estimated to the actual time remaining in your cycle. For
details, see "Modifiers."
NOTE: To change from an Auto Dry cycle to a Manual Dry
cycle, press MORE TIME or LESS TIME. The time
displayed will be the actual time.
• If desired, you can change the Manual Dry (Actual) time
by pressing MORE TIME or LESS TIME until the desired
time is displayed. See "Modifiers."
• For best fabric care, follow garment label instructions.
(OPTIONAL STEP) If desired, select OPTIONS. For more
details, see "Options."
(OPTIONAL STEP) If desired, set the SIGNAL VOLUME.
Press START. Be sure the door is closed.
• If you do not press START within 5 minutes of selecting
the cycle, the dryer will automatically shut off.
• If you wish to end your drying cycle after pressing START,
press STOP twice.
Loading ...
Loading ...
Loading ...