Loading ...
Loading ...
Loading ...
Programme options
63
Factory default settings
If you have altered any settings from the
factory default, you can reset them
back to the factory default settings as
follows:
Switch the dishwasher off with the
button, if it is switched on.
Press the /button in and, whilst
holding it in, switch the dishwasher
on using the button.
Keep the /button pressed in for
at least four seconds until the /
indicator light comes on.
If this does not happen, start the
procedure from the beginning again.
Press the button 12 times.
The indicator light will do 1 long
flash and 2 short flashes at intervals.
The flashing sequence in the display
indicates whether a setting has been
changed from its factory default.
– : All settings are set to factory
default settings.
– : At least one setting has been
changed.
To reset the dishwasher to the factory
default settings, press the /
button.
The setting is now stored in memory.
Switch the dishwasher off with the
button.
Loading ...
Loading ...
Loading ...