Loading ...
Loading ...
Loading ...
Programme options
60
If "Optimise standby" is switched on
(see "Programme options - Optimise
standby"), the display will go out after
a few minutes, leaving just the /
indicator light flashing slowly.
Press any button to switch the display
back on again for a few minutes.
The time up until the programme starts
will show counting down in the display
in hours for durations above 10 hours,
and in minutes for durations below this.
When the set time is reached, the
programme selected will start
automatically. The time remaining will
appear in the display and the
indicator light will go out.
How the Delay start time is shown in
the display:
up to 59 minutes:
e.g. 30 minutes = .
1 hour up to 9 hours 30 minutes:
e.g. 5 hours = .
10 hours and over:
e.g. 15 hours =
Starting a programme before the
Delay start period has elapsed:
A programme can be started before the
Delay start period has elapsed.
Proceed as follows:
Press and hold the /button for
at least one second.
The indicator light goes out and the
/indicator light begins flashing.
Press the /button again.
The programme will begin and the /
indicator light will light up.
Loading ...
Loading ...
Loading ...