Samsung WW85T3040WW Washer with Digital Inverter Technology, 8.5KG

User Manual - Page 17

For WW85T3040WW.

PDF File Manual, 112 pages, Read Online | Download pdf file

WW85T3040WW photo
Loading ...
Loading ...
Loading ...
English17
Installation
Installation requirements
Electrical supply and grounding
AC 220-240 V / 50 Hz fuse or circuit breaker
is required
Use an individual branch circuit specic to
the washing machine
To ensure proper grounding, the washing
machine comes with a power cord featuring a
three-prong grounding plug for use in a properly
installed and grounded outlet.
Check with a qualied electrician or
serviceperson if you are not sure about the
grounding.
Do not modify the provided plug. If it does not t
the outlet, call a qualied electrician to install a
proper outlet.
WARNING
Do NOT use an extension cord.
Use only the power cord that comes with the
washing machine.
Do NOT connect the ground wire to plastic
plumbing, gas lines, or hot water pipes.
Improperly connected grounding conductors
may cause electric shock.
Water supply
A proper water pressure for this washing
machine is between 50 kPa and 800 kPa. Water
pressure less than 50 kPa may cause the water
valve not to close completely. Or, it may take
longer to ll the drum, causing the washing
machine to turn off. Water taps must be within
120 cm from the rear of the washing machine so
that the provided inlet hoses reach the washing
machine.
To reduce the risk of leaks:
Make sure water taps are easily accessible.
Turn off the taps when the washing machine
is not in use.
Check for any leaks at the water inlet hose
ttings on a regular basis.
CAUTION
Before using the washing machine for the rst
time, check all connections at the water valve
and taps for any leaks.
Drain
Samsung recommends a standpipe in height of
60-90 cm. The drain hose must be connected
through the hose clip to the standpipe, and the
standpipe must fully cover the drain hose.
Flooring
For best performance, the washing machine
must be installed on a solid oor. Wood oors
may need to be reinforced to minimize vibration
and/or unbalanced loads. Carpeting and soft tile
surfaces are not a good resistance to vibrations
and may cause the washing machine to move
slightly during the spin cycle.
WW3000TM_7-8.5KG_UAE_8C104_000588_EN.indd 17WW3000TM_7-8.5KG_UAE_8C104_000588_EN.indd 17 2021-01-15  4:01:522021-01-15  4:01:52
Loading ...
Loading ...
Loading ...