Loading ...
Loading ...
Loading ...
irll,,_ll_
ASSEMBLY
TO ASSEMBLE AND ATTACH GRASS
CATCHER (See Figs. 3A thru 4)
• Insert leg of tubular frame through front opening of
grass catcher and thread frame into sewn hem of bag
NOTE: Keep bag hem gathered on the straight leg of the
tubular frame
= When frame comes out the other end of sewn hem,
immediately work the end of frame down inside the bag
as shown in inset
o Slide sewn hem evenly around the tubular frame until
both ends of frame are exposed out of the front open-
ing.
• Assemble lower frame to tubular frame as shown,. Be
sure handle is outside of bag and frames are fully
seated as shown in inset..
° Stip vinyl bindings over frame..
NOTE: If vinyl bindings are too stiff, hold them in warm
water for a few minutes.. If bag gets wet, let it dr! before
using
° Closethe flip lid Ftip lid must be closed while operating
lawn mower
° Lift the rear door on the mower housing and place the
grass catcher frame onto the formed tabs on the rear
door hinge bracket
° The grass catcher is secured to the lawn mower
housing when the rear door is lowered onto the grass
catcher frame
CAUTION: Do not run your lawn mower
without clipping deflector or approved
grass catcher in place. Never attempt
to operate the lawn mower with the rear
door removed or propped open°
TUBULAR FRAME SEWN
SEWN HEM
_ LOWER
" _ _ / FRAME
I _ // II (Framesmust
] I "_..," II be fully seated)
FIG. 3B
LOWER FRAME HANDLE
FIG. 3C
GRASS
CATCHER
FRAME
FORMED
TABS
FIG. 4
FIG, 3A
7
Loading ...
Loading ...
Loading ...