Loading ...
Warranty ......................................... 2
Safety Rules ...................................... 2
Unpacking ....................................... 3
Assembly ...................................... 3-4
Installation ....................................... 5
Operation ...................................... 6-9
Maintenance ................................... 9-12
Troubleshooting .................................. 13
Parts Illustrations and Lists ....................... 14-17
Espa_ol ...................................... 18-31
ONE-YEAR FULL WARRANTY ON CRAFTSMAN
PROFESSIONAL TOOL
If this Craftsman tool fails due to a defect in material or
workmanship within one year from the date of purchase CALL
1-800-4-MY-HOME® TO ARRANGE FOR FREE REPAIR.
This warranty applies only while this tool is in the United States.
This warranty gives you specific legal rights and you may
also have other rights, which vary, from state to state.
Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates,
IL 60179
WARNING: For your own safety, read all of the rules and
precautions before operating tool.
CAUTION: Always follow proper operating procedures as
defined in this manual even if you are familiar with use of
this or similar tools. Remember that being careless for even
a fraction of a second can result in severe personal injury.
BE PREPARED FOR JOB
• Wear proper apparel. Do not wear loose clothing, gloves,
neckties, rings, bracelets or other jewelry which may get
caught in moving parts of machine.
• Wear protective hair covering to contain long hair.
• Wear safety shoes with non-slip soles.
• Wear safety glasses complying with United States
ANSI Z87.1. Everyday glasses have only impact
resistant lenses. They are NOT safety glasses.
• Wear face mask or dust mask if operation is dusty.
• Be alert and think clearly. Never operate power tools
when tired, intoxicated or when taking medications
that cause drowsiness.
PREPARE WORK AREA FOR JOB
* Keep work area clean. Cluttered work areas invite
accidents.
* Do not use power tools in dangerous environments.
° Do not use power tools in damp or wet locations. Do
not expose power tools to rain.
° Work area should be properly lighted.
° Proper electrical receptacle should be available for tool.
Three-prong plug should be plugged directly into properly
grounded, three-prong receptacle.
• Extension cords should have a grounding prong and the
three wires of the extension cord should be of the correct
gauge.
• Keep visitors at a safe distance from work area.
• Keep children out of workplace. Make workshop childproof.
Use padlocks, master switches or remove switch keys to
prevent any unintentional use of power tools.
TOOL SHOULD BE MAINTAINED
° Always unplug tool prior to inspection.
° Consult manual for specific maintaining and adjusting
procedures.
° Keep tool lubricated and clean for safest operation.
° Remove adjusting tools. Form habit of checking to see that
adjusting tools are removed before switching machine on.
° Keep all parts in working order. Check to determine that
the guard or other parts will operate properly and perform
their intended function.
° Check for damaged parts. Check for alignment of moving
parts, binding, breakage, mounting and any other condi-
tion that may affect a tool's operation.
° A guard or other part that is damaged should be properly
repaired or replaced. Do not perform makeshift repairs.
(Use parts list provided to order repair parts.)
KNOW HOW TO USE TOOL
° Use right tool for job. Do not force tool or attachment to
do a job for which it was not designed.
° Disconnect tool when changing blades.
° Avoid accidental start-up. Make sure that the switch is in
the OFF position before plugging in.
° Do not force tool. It will work most efficiently at the rate
for which it was designed.
° Keep hands away from moving parts and cutting surfaces.
° Never leave tool running unattended. Turn the power off
and do not leave tool until it comes to a complete stop.
° Do not overreach. Keep proper footing and balance.
° Never stand on tool. Serious injury could occur if tool is
tipped or if blade is unintentionally contacted.
° Know your tool. Learn the tool's operation, application
and specific limitations.
° Use recommended accessories (refer to page 17). Use of
improper accessories may cause risk of injury to persons.
° Handle workpiece correctly. Protect hands from possible
injury.
° Turn machine off if it jams. Blade jams when it digs too
deeply into workpiece. (Motor force keeps it stuck in
the work.)
° Always keep drive, cutterhead and blade guards in place
and in proper operating condition.
° Feed work into blade against direction of rotation.
CAUTION: Think safety! Safety is a combination of operator
common sense and alertness at all times when tool is
being used.
WARNING: Do not attempt to operate tool until it is
completely assembled according to the instructions.
@Sears, Roebuck and Co. 2
Loading ...
Loading ...
Loading ...