Loading ...
Loading ...
Loading ...
25. PIP Input Select (Command2:y)
• To select input source for sub picture in PIP mode.
Transmission
I[k][y][ ][Set ID][ ][Data][Cr] I
Data 0 :RGB 3 :S-Video
1 : Component 4 : DVl
2 : Video
Acknowledgement
I[y][ ][Set ID][ ][OK][Data][x] I
26. Abnormal State (Command2:z)
• To recognize an abnormal state.
Transmission
I[k][z][ ][Set ID][ ][FF][Cr] I
Data FF:Read
Acknowledgement
[[z][ ][Set ID][ ][OK][Data][x]
Data 0: Normal (Power on and signal exist)
1: No signal (Power on)
2: Turn the monitor off by remote control
3: Turn the monitor off by sleep time function
4: Turn the monitor off by RS-232C function
5: 5V down
6: AC down
7: Turn the monitor off by fan alarm function
8: Turn the monitor off by off time function
9: Turn the monitor off by auto off function
a: Turn the monitor off by AV board detect
27. ISM Method (Command2:p)
• To avoid having a fixed image remain on screen.
Transmission
_][p][ ][Set ID][ ][Data][Cr] ]
Data 0: Normal 2: Orbiter
1: White wash 3: Inversion
Acknowledgement
[[p][ ][Set ID][ ][OK][Data][x] ]
28. Low Power (Command2:q)
• To control the low power function on/off.
Transmission
_][q][ ][Set Ig][ ][gata][Cr] ]
Data 0: Low power off
1: Low power on
Acknowledgement
[[q][ ][Set Ig][ ][OK][gata][x] ]
External Control Device Setup
29. Orbiter Time Setting (Command2:r)
• To adjust orbiter operation time term.
Transmission
_][r][ ][Set Ig][ ][gata][Cr] ]
Data Min: 1 ~ Max: FE
Acknowledgement
I[r][ ][Set ID][ ][OK][Data][x]
30. Orbiter Pixel Setting (Command2:s)
• To adjust pixel number in orbiter function.
Transmission
_][s][ ][Set ID][ ][Data][Cr] ]
Data Min:0~Max:9
Acknowledgement
I[s][ ][Set ID][ ][OK][Data][x]
31. Picture Size Setting for Double Window
mode (Command2:t)
• To adjust main window size in Double Window mode.
Transmission
_][t][ ][Set ID][ ][Data][Cr] ]
Data Min: 0 ~ Max: 64
• Refer to 'Real data mapping 1'. See page 28.
Acknowledgement
I[t][ ][Set ID][ ][OK][Data][x] ]
32. Auto Configure (Command2:u)
• To adjust picture position and minimize image shaking
automatically. It works only in RGB (PC) mode.
Transmission
_][u][ ][Set ID][ ][Data][Cr] ]
Data 1 : To set
Acknowledgement
I[u][ ][Set ID][ ][OK][Data][x]
Owner's Manua! 31
Loading ...
Loading ...
Loading ...